Contact Us
Contact: Mrs.Yao
Phone:(+86)13771551070
Contact: Mr.Zhou
Phone:(+86)13812059096
Tel: +86-510-83831286
Fax: +86-0510-83831286
E-mail: sales@wxlongwei.com
Address: Yaxi industrial Park, Luoshe Town, Wuxi City, Jiangsu
Home > Exhibition > Content
What lubricant is used when cleaning cold drawn tubes?
Apr 18, 2018

Cold-drawn tubes also need to be cleaned during use and maintenance. Cleaning cold-drawn tubes can make the cold drawn tubes relatively clean and hygienic, and play an important role in the use of the method. Cold-drawn tubes are made under relatively low temperature conditions and have more important performance and advantages. The cleaning of cold-drawn tubes is performed by professional techniques and lubricants. What is the specific method and type of lubricant used?

The common lubricant for cleaning cold drawn tubing is: soap water or vegetable oil The specific way and method is this:

The cold drawn tube must be completely removed before the cleaning of the burr on the tube end, and then use a hard nozzle, launch 2 clean shots for cleaning. If there is oil or grease contamination in the pipe, hard pipe projectiles should be used to more effectively remove such pollutants. If there is rust, welding slag, etc. in the pipe, friction pellets should be used to remove these contaminants first. Friction pellets can be used repeatedly until it is confirmed that these contaminants have been removed. Whether it is the use of hard pipe shells to remove oil contaminants or the use of frictional bombs to remove rust or welding slag, ultra-clean shot pellets must be used for final cleaning to ensure the ideal cleanliness of the pipeline. To clean the cold drawn tube assembly, it is recommended to clean the cold drawn tube before assembling the assembly. After being assembled as an assembly, it can only be cleaned with super-clean shots, and attention must be paid to the connection between the cold-drawn pipe and the joint, and there must be no steps. Hose nozzles can also be used to clean the cold drawn tubes, but they must be carried separately from the two ends when projectiles are fired to ensure that the nozzles are blocked by the nozzles. The cold-drawn tube ends down 1×45. The angle of the hose can greatly extend the service life of the hose nozzle.

Cold drawn tubes are used under various pressures and various temperatures. They play an enormous role in many occasions and various modes of use. They have become the main targets for the production and use of cold drawn tubes. In the future, the cold-drawn pipe will play a more important role!

 

http://www.skivingtubelw.com/

   


Previous: Is the cold drawn tube bright?

Next: How hard is the hardness of the cold drawn tube? How to measure the hardness of the standard