Contact Us
Contact: Mrs.Yao
Contact: Mr.Zhou
Tel: +86-510-83831286
Fax: +86-0510-83831286
Address: Yaxi industrial Park, Luoshe Town, Wuxi City, Jiangsu
Home > Exhibition > Content
Anti-rust treatment after chrome-plated rod end face processing
Jul 04, 2018

1. What is a chrome rod?

The chrome-plated rod is electroplated on the surface of the hard optical axis to form a layer of chromium with a hardness of 50-60. In addition, this type of bar can be used in the automation industry with linear bearings.


2. Comparison of chrome-plated rods and polished rods

The chrome-plated rod is chrome-plated on the optical axis to form a chromium-containing coating having good wear resistance, corrosion resistance and heat resistance. The polishing rod is used to polish the original rod instead of chrome plating. The surface hardness is not as good as that of the chrome rod, but the surface finish is better than that of the chrome rod because it is polished.


3. Comparison of light round iron and chrome-plated rod

The round iron is not high in hardness and is different from the chrome-plated rod in terms of wear resistance and corrosion resistance. In addition, in terms of product prices, chrome-plated rods are higher than round iron.


4. Anti-rust treatment after chrome-plated rod end face processing

The chrome-plated rod is integrally immersed in anti-rust oil or sprayed with anti-rust wax on its end face. In addition, the whole can also be rust-proof packaging treatment. As for which one to choose, it depends on the actual situation and the use requirements, which are determined by them.

Previous: Important parameters and instructions for hard chrome-plated rods

Next: Stainless steel cylinder rod basic requirements and processing technology