Contact Us
Contact: Mrs.Yao
Contact: Mr.Zhou
Tel: +86-510-83831286
Fax: +86-0510-83831286
Address: Yaxi industrial Park, Luoshe Town, Wuxi City, Jiangsu
Home > Exhibition > Content
High-precision cold drawn precision steel pipe production characteristics
Aug 21, 2018

(1) High production efficiency: It takes 154 hours to produce a cylinder tube with an inner diameter of 420 mm and a length of 12 meters by a conventional method, and it takes only 4 minutes to produce by cold drawing.

(2) High genuine rate: Because the rolling head of the boring head also plays a guiding role, during the cutting process, the blank tube is deflected due to its own weight, causing the rolling head and the boring tool to be biased, resulting in waste. The authentic rate can only reach about 60%, and the cold drawing method can produce more than 95%.

(3) High metal utilization rate: the cylinder is manufactured by the traditional boring method, and the metal utilization rate is only 50-70%. When produced by the drawing method, the metal is not only cut into iron, but can be extended by 30%, and the metal utilization rate can reach 95%.

(4) It can improve the mechanical properties of the finished pipe metal: it can be produced by the drawing method, so that the blank can be plastically deformed by more than 30%, and the strength limit of the finished pipe metal is greatly improved due to work hardening. Generally, the strength limit of the inner layer of the finished pipe is increased by 60%. The high-precision cold-drawn tube is made of seamless hot-rolled steel pipe and straight-slot welded pipe as a blank. After chemical treatment, it is drawn on a special cold drawing machine through a special deformation principle to produce a high-precision pipe. Its dimensional accuracy is H10~H8, the straightness is 0.35~0.5mm/m, and the surface roughness is Ra1.6-0.4.

Previous: Precision cold drawn steel pipe surface quality defects

Next: Hydraulic piston rods use various benefits of rolling