Applications and specifications of cold drawn steel pipes

Jan 22, 2020

Leave a message

Cold drawn steel pipes are produced by drawing, kneading, perforating and other methods. It is a round, square and rectangular steel with a hollow cross section and no seams on the periphery. It is made of steel ingots or solid tube blanks by perforation, and then cold drawn. Cold-drawn steel pipe is a fine cold-drawn seamless pipe for mechanical structures, hydraulic equipment with high precision and good surface finish.

The use of fine seamless pipes to make mechanical structures or hydraulic equipment can greatly save machining man-hours, improve data utilization, and help improve product quality. High-quality carbon structural steel cold-drawn seamless pipes are mainly made of 10 and 20 steels. In addition to ensuring chemical composition and mechanical properties, hydrostatic experiments, hemming, flaring, and flattening experiments are required.

Common standards for cold drawn steel pipes: 12mm 14mm 18mm 20 mm 25mm 28mm 30mm 32mm 35mm 38mm 40mm 42mm 52mm To obtain seamless tubes with smaller dimensions and better quality, it is necessary to choose cold rolling, cold drawing or a combination of the two . Cold rolling is usually carried out on a two-roll mill, and the steel tube is rolled in a ring-shaped pattern composed of a variable-section circular hole groove and a fixed conical head. Cold drawing is usually performed on a single-chain or double-chain cold-drawing machine of 0.5 to 100T.

Cold-drawn machined steel tube is hardened. During cold drawing, the metal undergoes plastic deformation, and multiple slip systems within the crystal are activated. Dislocation movements are blocked by each other. Many dislocations are pinned to form dislocation plugging. The dislocation source stops the action. The above series of processes lead to a decrease in dislocation mobility, and the dislocation density in the crystal is significantly increased. When the plastic deformation occurs further, stress is added enough to make the dislocation of the pinned dislocation begin to move, the screw dislocation intersects and slips, and the edge dislocations cannot intersect and slip, so the dislocations intersect and add the fixed order.

The above is what Xiaobian has compiled for you about the differences between hot-rolled tubes and cold-drawn tubes. In fact, hot-rolled tubes and cold-drawn tubes are very good building materials. As long as they are used clearly, they are used in the right Places can make the most of it. I hope Xiaobian's collation can help you.


Send Inquiry