1. Poor coaxiality In a hydraulic cylinder, if the coaxiality between the piston and the piston rod is not good, the speed of the hydraulic cylinder will be unstable. 2. The influence of the machining accuracy of parts The machining accuracy of the inner wall of the hydraulic cylinder and the surface of the piston rod has a great influence on the low-speed stability of the hydraulic cylinder, such as straightness. 3. Seal material problem In hydraulic cylinder, due to the hardness, strength, and followability of the seal material, it will directly affect the friction with the sliding surface and cause the change of hydraulic cylinder speed. 4. Air is mixed into the hydraulic cylinder. If there is gas mixed in the hydraulic oil, the piston rod will change its volume under pressure. Then it makes it even explode instantly under high pressure, which causes the speed of the hydraulic cylinder to be unstable. 5. Improper hydraulic cylinder design clearance. The sliding fit clearance between the piston and the cylinder body, the piston rod and the guide sleeve of the hydraulic cylinder is too large, causing uneven pressure on the sliding surface, uneven friction, and low-speed crawling of the hydraulic cylinder ; If the sliding fit clearance is too small, plus the tolerances in the parts manufacturing, it will also cause uneven pressure on the sliding surface, resulting in uneven friction and causing the hydraulic cylinder to crawl at low speed.
https://www.skivingtubelw.com/
