Steel is an alloy of iron, carbon and a small amount of other elements. Steel is a kind of material with various shapes, sizes and properties which is made of ingot, billet or steel by pressure processing. Steel is an essential material for national construction and Realization of the four modernizations. It is widely used and has a wide variety. According to the different cross-section shapes, it is generally divided into four categories: profile, plate, pipe and metal products. In order to facilitate the production, ordering and supply of steel and do a good job in business management, it is also divided into heavy rail, light rail, large section steel, medium section steel, small section steel and cold bending section steel Steel, high quality section steel, wire rod, medium thick steel plate, sheet steel, silicon steel sheet for electrical purposes, strip steel, seamless steel pipe, welded steel pipe, metal products and other varieties.
Steel is an alloy of iron, carbon and a small amount of other elements. Stainless steel or corrosion-resistant alloy steel with 10.5% or more chromium content is a general term for this kind of metal. It should be remembered that stainless steel does not mean that the steel will not rust or be corroded, but that it has much better corrosion resistance than chromium free alloys. In addition to chromium, other metal elements such as nickel, molybdenum and vanadium can also be added to the alloy to change the properties of alloy steel, so as to produce stainless steel with different grades and properties. Due to different application purposes and places, it is very important to carefully select the most suitable stainless steel tools for improving the work efficiency and success probability of specific work. The advantages of different metal elements in the tool. Simply put: steel is an alloy of iron and carbon. Other ingredients are used to make a difference in steel properties. The important steels are listed in alphabetical order below, and they contain the following components:
Carbon - found in all steels, is the most important hardening element. It helps to increase the strength of steel. We usually hope that the tool grade steel has more than 0.5% carbon, which is also high carbon steel.
Chromium - increases wear resistance, hardness, and, most importantly, corrosion resistance, with more than 13% considered stainless steel. Even so, if not properly maintained, all steel will rust.
Manganese - an important element that contributes to the formation of texture structures, increased soundness, strength, and wear resistance. Deoxidize the steel in the process of heat treatment and rolling, which appears in most of the steel used for cutting, except A-2, L-6 and CPM 420v.
Molybdenum - a carbonating agent that prevents steel from embrittlement and maintains the strength of steel at high temperatures. It appears in many steels. Air hardening steels (such as A-2, ATS-34) always contain 1% or more molybdenum, so that they can harden in air.
Nickel - maintains strength, corrosion resistance, and toughness. Appears in L-6 \ aus-6 and aus-8.
Silicon - helps increase strength. Like manganese, silicon is used in the production of steel to maintain the strength of the steel.
Tungsten - increases wear resistance. Tungsten is mixed with chromium or manganese in proper proportion to produce high speed steel. High speed steel m-2 contains a lot of tungsten.
Vanadium - increases wear resistance and ductility. A vanadium carbide used to make striped steel. Vanadium is contained in many kinds of steel, among which m-2, vascowear, CPM t440v and 420va contain a lot of vanadium. The biggest difference between bg-42 and ATS-34 is that the former contains vanadium.
