A skiving tube is a high-precision tubing used primarily in hydraulic cylinders, rolling bearings, and high-pressure machinery. The key to its machining lies in creating a precise, smooth, and wear-resistant inner bore to ensure reliable operation of the equipment under high-speed or high-pressure conditions. The machining process mainly includes material preparation, rough machining, scraping, surface treatment, and inspection.
1. Raw Material Preparation
Skiving tubes are typically made from high-strength steel or alloy tubing, such as carbon steel, chromium-molybdenum steel, or stainless steel. Material selection must consider hardness, wear resistance, and thermal stability to ensure the tubing is not easily deformed or damaged during machining and use. The material is usually tempered or heat-treated before machining to improve machinability.
2. Rough Machining and Pre-treatment
Before scraping, the tube blank needs to undergo rough machining, commonly using methods such as turning, boring, or internal drilling. This step machines the inner bore to near the design dimensions, providing a good starting condition for precision scraping. Simultaneously, the surface of the tube blank needs to be free of oxide scale, burrs, and impurities to ensure smooth cutting and stable machining accuracy.
3. Skiving
Skimming is the core process of Skiving Tube machining. The skimming tool moves simultaneously along the axial and rotational directions of the tube, cutting the inner hole material to form a precise-sized and high-surface-finish inner hole. Skimming combines cutting and burnishing principles, improving the roundness of the inner hole, reducing surface roughness, and improving the material's microstructure, thereby enhancing the wear resistance and sealing performance of the tube fitting. The tool material is generally high-speed steel or cemented carbide, and the tool geometry, feed rate, and rotational speed must be strictly controlled to achieve optimal machining results.
4. Burnishing and Surface Strengthening
After skimming, burnishing can be performed to further improve the performance of the inner hole. The burnishing tool applies pressure to the inner hole surface through elastic rollers, flattening the microscopic protrusions and forming a hardened layer on the surface, improving wear resistance and friction performance. This process can significantly reduce the roughness of the inner hole and increase the service life of hydraulic or bearing systems. 5. Heat Treatment and Post-treatment
Depending on application requirements, Skiving Tubes can be quenched, tempered, or surface carburized to improve hardness, wear resistance, and fatigue strength. Additionally, rust-preventive oil can be added or a surface coating applied to enhance corrosion resistance.
6. Precision Inspection and Quality Control
After machining, internal hole roundness, surface roughness, hardness, and dimensional tolerances must be inspected to ensure each Skiving Tube meets design standards. Rigorous inspection and quality control are crucial for ensuring the reliability of the fittings under high pressure or high speed operation.
Skiving Tube machining is a precision systems engineering process involving material selection, rough machining, scraping, roll polishing, heat treatment, and rigorous inspection. Each step directly affects internal hole accuracy, surface finish, and the fitting's wear resistance. By scientifically controlling the machining process and parameters, the manufactured Skiving Tubes can meet the high requirements of hydraulic, bearing, and high-pressure mechanical equipment for wear resistance, sealing, and service life.
