How to complete the pickling and rust removal of precision seamless steel tubes

Mar 05, 2019

Leave a message

How to complete the pickling and rust removal of precision seamless steel tubes

Precision seamless steel tubes are also constantly playing a huge role in the production process, and need to be pickled during the maintenance and maintenance process. Precision seamless steel tubes and oxides have different solubility in hydrochloric acid and sulfuric acid. At 20 ° C, 7.5 g of ferric oxide can be dissolved in 10% hydrochloric acid solution per 100 g of test piece, but only in 10% sulfuric acid solution. Dissolve 0.98 g of ferric oxide. At the same temperature and concentration, the solubility of hydrochloric acid on iron parts is more than 7 times that of sulfuric acid.

 

Therefore, the surface of the precision seamless steel tube is derusted and used with hydrochloric acid. The hydrochloric acid has high derusting speed, high efficiency, no hydrogen embrittlement and good surface condition. It is safer and more economical than sulfuric acid when preparing the washing liquid. In addition, when the precision seamless steel tube is rusted, do not rush to wash with soapy water and laundry detergent to avoid various adverse effects!

 

In order to avoid corrosion of precision seamless steel tubes, new processes are being sought that can replace this method. In the cold processing industry, such as take-up, drawing, extrusion, deep drawing and other processes, the phosphating film is required to provide friction-reducing lubrication performance. Generally, zinc-based phosphating is used. First, the zinc-based phosphating film is saponified to form a hard lubricity. Zinc sulphate layer, the second is zinc phosphating operation temperature is relatively low, can be phosphating at 40, 60 or 90 ° C, phosphating time 4 ~ 10min, sometimes even tens of seconds, phosphating film The weight requirement is ≥3g/m2.www.skivingtubelw.com


Send Inquiry