Material selection and elongation of cold drawn steel tube

Apr 24, 2019

Leave a message

The cold drawn steel tube is mainly made of hot rolled pipe in the process of production. The selection of the material, specification and quality of the hot rolled pipe during operation directly affects the drawing and finished product. quality. Pay attention to the following points when selecting materials:

1. When cold drawn steel tube are selected, generally, in the case of strength assurance, materials with low hardness and good plasticity are selected for use.

2. The specifications of the cold drawn steel tube should be selected according to the specifications of the finished product, so that the elongation can be effectively guaranteed at 20% to 40%; the elongation is too small, the surface of the finished product is The strength cannot be guaranteed, and it is too large to make the drawing difficult.

3. The surface of the cold drawn steel tube shall be free from defects such as pits, cracks, cracks, folds, crusting, and ellipse.

4. Cold drawn steel tube is best to choose 0.5~2a steel pipe after hot rolling. The time is too short, the surface of the steel pipe is rusted and shallow, the time is too long, and the surface of the steel pipe is too rusted, which will lead to insufficient pretreatment of the steel pipe surface, thus affecting Finished surface quality.www.skivingtubelw.com


Send Inquiry