Cold drawn seamless steel pipes have the characteristics of no oxide layer on the inner and outer walls, no leakage under high pressure, high precision, high finish, no deformation of cold bending, no cracks in flaring and flattening, and anti-rust treatment on the surface. They are mainly used for mechanical structures, Hydraulic equipment and pneumatic or hydraulic components of automobiles and motorcycles, such as cylinders or oil cylinders.
Cold drawn precision seamless steel pipe specifications
The basic process flow of cold drawing is: hot rolled capillary, capillary inspection, grinding, capillary pickling, capillary reinspection after pickling, cold drawing, straightening before finishing pass, pickling, lubrication, fine drawing, before finished product Processing and storage.
Pay attention to control in production:
1. Capillary
The wall thickness of the capillary tube should be uniform, and the internal and external surface defects should be small; external surface polishing and internal hole defect cleaning equipment should be equipped.
2. Re-inspection
Compared with ordinary cold-drawn steel pipes, the production of cold-drawn precision seamless pipes adds a hot-rolled capillary pickling and re-inspection process. The main purpose is to ensure that the outer surface of the capillary is free from folds, cracks and other defects, and to eliminate the presence of folds and severe lines on the inner surface , Pitted surface and other defective capillary.
3. Tools
Generally, the surface finish of the tools used in the production of cold-drawn precision seamless steel pipes is required to be above Ra0.4, the dimensional accuracy is above H3, and the hardness is required to be above HRC70. At the same time, it is required that the plug or die sticking to steel should not occur during the drawing process.
4. Annealing
Annealing is a very important process in all cold drawn pipe production. The quality of annealing affects both the performance of the steel pipe and the removal of scale. Cold drawn precision steel pipes need to be equipped with non-oxidizing bright annealing furnace equipment.
https://www.skivingtubelw.com/
