Talking about the material selection of Stainless Steel 304 Hydraulic Precision Piston Rod

Apr 26, 2021

Leave a message

Stainless steel piston rods are mainly used in hydraulic and pneumatic, engineering machinery, and automobile manufacturing piston rods. The piston rod is processed by rolling. Because the surface layer leaves the surface residual compressive stress, it helps to close the micro cracks on the surface and hinder the expansion of corrosion. So as to improve the surface corrosion resistance, and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. Through roll forming, a cold hardened layer is formed on the rolled surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder rod surface and avoiding burns caused by grinding. After rolling, the surface roughness value is reduced, which can improve the matching properties. At the same time, the friction damage to the seal ring or the seal member when the cylinder rod piston moves is reduced, and the overall service life of the cylinder is improved. The rolling process is a high-efficiency and high-quality process measure. The rolling head with a diameter of 160mm is now used as an example to prove the rolling effect. After rolling, the surface roughness of the cylinder rod is reduced from Ra3.2~6.3μm before rolling to Ra0.4~0.8μm, the surface hardness of the cylinder rod is increased by about 30%, and the surface fatigue strength of the cylinder rod is increased by 25%. The service life of the oil cylinder is increased by 2 to 3 times, and the rolling process is about 15 times more efficient than the grinding process. The above data shows that the rolling process is highly efficient and can greatly improve the surface quality of the cylinder rod.

https://www.skivingtubelw.com/

Send Inquiry