Cold drawn steel pipe is an important form and type of seamless pipe. It is widely used in various construction projects, building construction and decoration. Cold drawn steel pipe is widely used in It is always found to be broken in production and major sales, that is, many links in the production are not done well, and the other is the lack of ingredients and the wrong proportion of chemical elements. These reasons are all.
1. Small longitudinal split
The small longitudinal cracks on the surface of cold drawn steel pipes are less than 200mm in length, less than 3mm in width, and less than 0.3mm in depth.
2. Peak cracks
The cracks all occurred at 5-60mm from the edge of the lower surface of the cold drawn steel pipe, and the macroscopic direction was perpendicular to the rolling direction, showing a "mountain peak" shape.
3. Edge cracks
This crack mainly occurs at a distance of 20-80mm from the edge of the cold drawn steel pipe. The shape is a number of parallel longitudinal cracks of different sizes. The rule is that the thicker and wider the cold drawn steel pipe, the more serious the defects.
4. Inclusions and scars
The inclusions and scars are distributed regularly, and the phenomenon is obvious after finishing operations such as edge flame peeling crack inspection or casting slab scratch flame cleaning.
For the fiber structure and crystal defects such as dislocations and vacancies in the steel, heat treatment methods such as annealing or normalizing are generally used to eliminate them. The purpose of annealing is to refine grains, eliminate structural defects, reduce hardness, improve plasticity, and facilitate cold working. In the production of cold-drawn cold-drawn steel pipes, annealing equipment is indispensable. Therefore, formulating a suitable annealing process is a necessary condition to ensure that the cold-drawn steel pipe is qualified and the product does not have fracture defects. If the manufacturer reduces the annealing process in order to reduce production costs one-sidedly, it will definitely have an adverse effect on product quality.
The performance is higher than that of general cold drawn steel pipes. The chemical composition of alloy pipes contains more Cr, and it has high temperature resistance, low temperature resistance and corrosion resistance. Common carbon seamless pipes do not contain alloy components or have very few alloy components. The reason why alloy pipes are widely used in petroleum, aerospace, chemical, electric power, boiler, military and other industries is because the mechanical properties of alloy pipes change and adjust.
The use of cold drawn steel pipes to manufacture ring parts can improve material utilization, simplify manufacturing procedures, save materials and processing man-hours, such as rolling bearing rings, jack sleeves, etc., which are currently widely used in steel pipes.
Cold drawn steel pipes can be divided into round pipes and special-shaped pipes according to different cross-sectional area shapes. Since the circle area is the largest under the condition of the same circumference, more fluid can be transported with a circular tube. In addition, when the ring section bears internal or external radial pressure, the force is relatively uniform. Therefore, most steel pipes are round pipes.
https://www.skivingtubelw.com/
