Cold drawn seamless pipe is a new type of high-tech energy-saving product. , The popularization and application of high-precision cold-drawn precision steel pipe is helpful to save steel, improve processing efficiency, and save energy. The so-called high-precision cold-drawn seamless pipe refers to strict internal and external dimensional accuracy (tolerance range), internal and external surface finish, roundness, and straightness. The main technical indicators of the high-precision cold drawn seamless pipe produced by this technology have reached or partially exceeded the requirements of the national standard GB8713-88 and the international standard ISO4394/I-1980(E).
The cold-drawn seamless pipe is work hardened. During cold drawing, the metal undergoes plastic deformation, multiple slip systems inside the crystal are activated, and the dislocation movement intercepts each other, and many dislocations are pinned, causing dislocation accumulation, and the dislocation source stops moving at the same time. The above-mentioned series of processes lead to a decrease in the mobility of dislocations and a significant increase in the dislocation density in the crystal. When the plastic deformation further occurs, the stress increases and is enough to make the pinned dislocations start to move, the screw dislocations slip, and the edge dislocations cannot slip, so that the dislocations are intersected and the immovable order increases.
Therefore, the internal dislocation density of the precision cold drawn seamless tube is increased, and the mobility of the dislocation is reduced, and it is difficult to generate and move the dislocation, so the hardness and strength of the metal material are improved.
Rolling processing is a kind of chipless processing that uses plastic deformation of metal at room temperature to flatten the microscopic unevenness of the workpiece surface to achieve the purpose of changing the surface structure, mechanical properties, shape and size. Therefore, this method can achieve both smoothing and strengthening purposes at the same time, which is impossible for grinding. No matter what processing method is used for processing, there will always be fine uneven tool marks on the surface of the part, and the phenomenon of staggered and undulating peaks and valleys. Rolling processing principle: It is a pressure finishing process, which uses metal at room temperature. The cold plasticity characteristics of the state use a rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces a plastic flow, which is filled into the original residual low concave trough, and the surface roughness of the workpiece is reduced. Due to the plastic deformation of the rolled surface metal, the surface structure is cold hardened and the crystal grains become finer, forming a dense fiber shape, and forming a residual stress layer, which improves the hardness and strength, thereby improving the wear resistance and corrosion resistance of the workpiece surface Sex and coordination. Rolling is a non-cutting plastic processing method.
https://www.skivingtubelw.com/
