Principle of high-frequency quenching: Place the workpiece in an inductor wound with a hollow copper tube. After passing high-frequency alternating current, an induction current of the same frequency is formed on the surface of the workpiece, and the surface or part of the part is rapidly heated (within a few seconds) It can be heated to 800~1000℃, and the core is still close to room temperature. After a few seconds, spray (immersion) water cooling (or spray oil cooling) quickly and immediately complete the immersion work, so that the surface or part of the workpiece can meet the corresponding hardness requirements.
https://www.skivingtubelw.com
