What aspects should be paid attention to when placing cold drawn seamless pipes

Jun 10, 2022

Leave a message


In fact, cold-drawn seamless pipes are relatively "fragile". Not only do they need to be protected in the process of raw tea, but their placement during storage is also more important. Improper placement may cause rust and other phenomena. Let's learn how to place it correctly.


1. Cold-drawn seamless pipes and carbon steel pipes cannot be stacked together, because the materials of carbon steel pipes and cold-drawn seamless pipes are different. In a humid environment, if carbon steel pipes and cold-drawn seamless pipes are combined It is easy to have a chemical reaction when they are stacked together, and then damage the protective layer of the cold-drawn seamless pipe, causing the cold-drawn seamless pipe to rust.


2. If different steels are stacked together in contact, a potential difference will occur, resulting in galvanic corrosion, especially when water accumulates, the galvanic corrosion rate between the cold-drawn seamless pipe and the carbon steel pipe will be accelerated.


3. Just like the battery principle, chemical energy is directly converted into electrical energy in a chemical battery because the oxidation recovery reaction occurs inside the battery. In order to prevent electrochemical corrosion and carburization of cold drawn seamless pipes, try not to pile them together. However, at room temperature, when the carbon steel and the stainless steel are in contact with the countersunk head, the carburizing appearance will not occur immediately, and the gorgeous corrosion on the cold-drawn seamless pipe will only appear after a certain period.


It is suggested that the cold-drawn seamless pipe should be placed in a clean and ventilated environment during the placement process, and cleaned in time, so as to avoid the corrosion of the cold-drawn seamless pipe, prolong the service time of the pipe, and ensure its quality.


Send Inquiry