What factors affect the reliability of the piston rod

May 02, 2021

Leave a message

The hydraulic processing of the stainless steel piston rod adopts rolling processing to improve the surface corrosion resistance, and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. Through roll forming, a cold hardened layer is formed on the rolled surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder rod surface and avoiding burns caused by grinding. After rolling, the surface roughness value is reduced, which can improve the matching properties. At the same time, the friction damage to the sealing ring or the sealing element when the cylinder rod piston moves is reduced, and the overall service life of the cylinder is improved. The rolling process is an efficient and high-quality process measure. Piston rods can be used in hydropneumatics, and its processing requirements are relatively high, so the quality of hydraulic cylinders is mostly affected by the quality of the piston rod. The working mode of the piston rod is in the form of reciprocating motion. In order to increase the life of the piston rod and reduce the wear of the piston rod, 38CrMoAlA alloy structural steel is selected as the blank. Since the production type belongs to batch production, in order to improve production efficiency, it is advisable to use the free forging method to manufacture the blank. According to the technical requirements and assembly requirements of the piston rod, the left and right end faces and the center holes of the two end faces of the piston rod should be selected as the precise reference. Many surfaces on the part can be processed with the two ends as a reference. It can avoid benchmark conversion errors and also follow the principle of benchmark uniformity. The central axis at both ends is the design basis.

https://www.skivingtubelw.com/

Send Inquiry