About Cold Drawn Tubes

Feb 26, 2021

Leave a message

Cold drawing is a process, which can be cold drawn round tubes, cold drawn square tubes, and cold drawn special-shaped tubes. Cold drawing is a processing technology of materials. For metal materials, cold drawing refers to drawing under the condition of normal temperature in order to achieve a certain shape and certain mechanical properties. Compared with hot forming, cold drawn products have the advantages of higher dimensional accuracy and better surface finish. The plastic deformation process after the neck of the sample in the tensile test. At this time, the elongation of the sample is manifested as a necked section with stable cross-sectional dimensions extending along the sample until the entire sample becomes a necked state. Neck formation occurs when the stress at the yield point drops sharply. According to the temperature of the metal during drawing, drawing below the recrystallization temperature is cold drawing, drawing above the recrystallization temperature is hot drawing, and drawing above room temperature and lower than the recrystallization temperature is warm drawing. Cold drawing is the most common drawing method used in wire and wire production. During hot drawing, the wire must be heated before entering the die hole. It is mainly used for drawing high melting point metals such as tungsten and molybdenum. During warm drawing, the metal wire also needs to be heated to a temperature within the specified range by a heater before entering the die hole for drawing. It is mainly used for drawing of zinc wire and alloy wires that are difficult to deform, such as high-speed steel wires and bearing steel wires.

https://www.skivingtubelw.com

Send Inquiry