Cold Drawn Steel Pipe Production Steps

Feb 20, 2021

Leave a message

1. Cold-rolled and cold-drawn steel pipes have high tolerance and dimensional accuracy, and the product accuracy is controlled at ±0.05mm; the smoothness is good; the inner and outer surfaces have no oxide layer, and the inner wall is clean.

2. Cold-rolled No. 20 cold-drawn steel pipe has excellent comprehensive performance, can withstand high pressure, cold-formed, flared, and flattened without cracking or wrinkling, and can be processed for various complex deformations and mechanical processing.

3. The popularization and application of thick-walled cold-drawn steel pipes can save steel, improve processing efficiency, reduce processing procedures and equipment investment, save costs and greatly save mechanical processing hours, increase production volume and material utilization, and at the same time help improve product quality. cut costs.

In mold manufacturing, the use of electrical discharge machining (electric pulse and wire cutting) is an increasingly common processing method, but with the wide application of electrical discharge machining, the defects caused by it increase accordingly. Since electrical discharge machining is a processing method that melts the surface of the mold by the high temperature generated by the electrical discharge, a white electrical discharge machining deterioration layer is formed on the processed surface, and a tensile stress of about 800mpa is generated. In this way, the electrical machining process of the mold Defects such as deformation or cracks often appear in the battery. Therefore, the use of electrical discharge machining molds must fully understand the impact of electrical discharge machining on mold materials and take corresponding preventive measures in advance.

This is a quality problem that often occurs in Q345B cold drawn steel pipes. For Q345B cold drawn steel pipes, it is necessary to enhance its advantages and characteristics in all aspects, and pay special attention to it when purchasing. In this case, Q345B cold drawn steel pipes should be purchased when purchasing. You can avoid these failures and avoid being cheated. For more information about Q345B cold drawn steel pipes, please continue to pay attention! If the seamless steel pipes are produced too much or cannot be sold in time during the production process, the seamless steel pipes should be stored in time, generally In the case of storage of seamless steel pipes, attention should be paid to the environment, because seamless steel pipes have extremely high environmental requirements, and only the storage environment is continuously improved, so that the overall storage effect of seamless steel pipes is relatively good Otherwise, the seamless steel pipe will become rusty and corroded, and the seamless steel pipe will deteriorate. This is not good for the overall effect and performance of the seamless steel pipe.

https://www.skivingtubelw.com

Send Inquiry