Precautions and basic requirements for polishing of stainless steel precision piston rod

May 01, 2019

Leave a message

Stainless steel precision piston rod should pay attention to the following aspects when polishing

1. Wipe and remove surface particles and contaminants adhering to the surface before polishing, and eliminate some serious oxidation, fine scratches and surface defects.

2, in the polishing should adhere to the "should be slow, not fast, rather light, not heavy" principle.

3. At the beginning of polishing, it is necessary to deal with difficult to polish areas such as corners, corners and rounded corners.

4. Polishing is to further smooth the lacquer after grinding, so the residual streaks should be removed first, and then the polishing agent can be used to make the lacquer gloss naturally appear.

Stainless steel precision piston rod polishing must be carried out in a clean, dust-free room. Otherwise, hard dust particles can contaminate the abrasive material, and to some extent damage the surface of the mold that is nearing completion.

Basic requirements forstainless steel precision piston rod

(1) Be able to have sufficient strength, rigidity and stability.

(2) Good wear resistance and high processing accuracy and surface roughness requirements.

(3) Minimize the effects of stress concentration on the structure.

(4) Ensure reliable connection and prevent looseness.

www.skivingtubelw.com

Send Inquiry