The machining feeding speed is very fast during the precision skiving tube course, so,the efficiency of precision skiving tube is 20times than of traditional honing process. So,we advise that if the tube is need of further machining, please select precision skiving tube process. The surface roughness is very stable,whatever it is welding or other further process.

 The advantage of Skiving roller &burnishing tube

1，Shorten the machining time comparing to the honing process( about 30minutes), several minutes is ok

2，The hardness of surface by precision skiving tube comparing to honing and extend the tube usage life-time.

3，Improving the surface roughness.

Save the cost of machining. The honing process will leave the honing muddy stone and the precision skiving tube process will leave the chips.

the feature of precision skiving tube

1.Improve the surface roughness , reaching to Ra≤0.04uｍ

2.Adjust roundness ,ellipticity reach  ≤0.02ｍｍ

3，improve the hardness of surface,relief the deformation ,enhance the hardness to HV≥4°  

4. Obtain residual stress layer after process to increase fatigue strength by 30%

Increasing the quality,reduce wear and extend the life time of components and increase the cost of machining.

http://www.skivingtubelw.com/