Process flow of cold rolled steel tube

Mar 31, 2020

Leave a message

The main advantage of cold-rolled steel pipe is the large reduction rate of section, especially the strong wall reduction ability. For carbon steel, the reduction rate of cross-section can reach 80% - 83%, and for alloy steel 72% - 75%. Its main disadvantage is the difficulty of tool replacement. Cold rolling method is often used in combination with cold drawing method in order to produce cold drawing billets, except that it is directly used to produce some cold-rolled pipes with high precision. This can not only give full play to the wall reducing ability of cold rolling, but also make good use of the advantages of easy replacement of cold drawing tools, which is conducive to improving productivity, expanding the production range of products and improving the surface quality of steel pipes.

At present, cold-rolled tube production multi cycle cold-rolled tube mill. The working characteristics of the periodic cold rolling mill are that the steel pipe and the mandrel are fixed, the reciprocating motion of the stand drives the rolling mill to roll the steel pipe, and the variable cross-section pass is used to compress the rolled piece, so as to achieve the purpose of reducing the diameter and the wall.

When the mill and roll are in the original position a, the pass size is the largest (slightly larger than the outer diameter of the billet); when the stroke limit position B is reached, the pass size is slightly larger than the outer diameter of the finished product; before the position B is reached, the pass size is the smallest, which is equal to the outer diameter of the finished product. In the original position a, the feeding pipe material is 3-30mm each time according to the size of the rolling mill. At position B, turn the tube material, turn it 60 ° ~ 90 ° each time, so that the tube wall can be rolled flat when the roller returns. After returning to the original position a, the feeding pipe material starts rolling in the next cycle. After rolling the pipe repeatedly, the cold-rolled steel pipe of the required size is finally rolled out.

The product specification range of cold-rolled steel pipe is: outer diameter 4.0-450mm; wall thickness 0.04-60mm. Compared with the cold drawing method, the advantages of the periodic cold rolling method are large reduction of pass surface, no need of hard end and high yield. The disadvantages are slow production speed, high cost of tools and high cost of intermediate treatment. This method is used to produce stainless steel pipes.


Send Inquiry